Mamiya SX Lenses for the MSX & DSX Series
Lens	Groups	Elements	View Angle	Min. Aperture	Diaphragm	Min. Focus Dist.	Filter	Lens Hood	Wgt
14mm f/3.5 Fisheye	7	10	180º	f/16	AE	1.0 ft. (0.30m)	Built-in	None	10.3 oz. (295g)
21mm f/4.0	8	9	91º	f/16	Auto	1.5 ft. (0.45m)	58mm	None	7.75 oz (220g)
28mm f/2.8	7	7	75º	f/16	Auto	1.0 ft. (0.30m)	58mm	Slip-on	7.75 oz. (220g)
35mm f/2.8	5	7	63º	f/16	Auto	1.50 ft. (0.40m)	52mm	Slip-on	7.4 oz. (210g)
50mm f/1.4	6	7	47º	f/16	AE	1.50 ft. (0.45m)	49mm	Screw-in	7.3 oz. (205g)
50mm f/2.0	4	6	47º	f/16	Auto	1.50 ft. (0.45m)	52mm	Screw-in	6.5 oz. (185g)
55mm f/1.4	5	7	43º	f/16	Auto	1.50 ft. (0.45m)	52mm	Screw-in	8.8 oz. (250g)
55mm f/1.8	5	6	43º	f/16	Auto	1.50 ft. (0.45g)	52mm	Screw-in	6.9 oz. (195g)
85mm f/1.7	4	6	28º	f/16	Auto	3.0 ft (0.90m)	58mm	Screw-in	17.6 oz. (500g)
85mm f/2.8	4	4	28º	f/16	Auto	2.75 ft. (0.85m)	52mm	Built-in	8.6 oz. (245g)
100mm f/2.8	4	5	24º	f/22	Auto	4.0 ft. (1.20m)	52mm	Screw-in	9.5 oz. (270g)
105mm f/2.8	4	4	23º	f/16	Auto	4.0 ft. (1.20m)	52mm	Built-in	9.7 oz. (274g)
135mm f/2.8	4	4	18º	f/22	Auto	5.0 ft. (1.50m)	52mm	Built-in	18.3 oz. (520g)
200mm f/3.5	4	4	12º	f/22	Auto	7.5 ft. (2.30M)	58mm	Built-in	20.8 oz. (490g)
300mm f/5.6	4	5	8º	f/22	Auto	15.0 ft. (4.5m)	58mm	Built-in	31.1 oz. (880g)
600mm f/8.0	3	3	4º	f/32	Pre-set	33.0 ft. (10.0m)	41.27mm Drop-in Ser. VI	Screw-in	68.8 oz. (1,950g)
800mm f/8.0	4	4	3º	f/32	Pre-set	60.0 ft. (18.0m)	41.27mm Drop-in Ser. VI	Screw-in	86.4 oz. (2,450g)
90-230mm f/4.5 Zoom	8	11	27º-10º	f/22	Auto	5.0 ft. (1.50m)	58mm	Built-in	31.75 oz. (900g)
Macro 60mm f/2.8	4	5	40º	f/22	Pre-set	9.25 in. (0.235m)	58mm	None	13.4 oz. (380g)
NOTE: An available Tamron Adaptall-2 adapter allows the use of Tamron SP lenses (and perhaps others) with MSX-DSX cameras. Hard to find, the adapter makes the lenses compatible with the MSX-DSX open aperture meter system.

Additional Accessories Available for Mamiya MSX-DSX Cameras
The following are the original Mamiya accessories available for these cameras:

Filters:	A series of five high-quality filters, designed to maintain the high performance of the Mamiya/Sekor SX lenses. They come in the following types: Y2, O2, UV, YG and SL (skylight).
Lens Hoods:	A lens hood is, in most cases, a necessary accessory to keep unwanted light from striking the lens and causing a flare. Always use the lens hood recommended for a specific lens.
Diopter Correction Lenses:	Many near- and far-sighted persons have difficulty looking through a viewfinder wearing glasses, but cannot focus accurately with them. Diopter Correction lenses, available in six different strengths, adjust for this deficiency.
Rubber Eye Cup:	The Rubber Eye Cup, mounted on the rear viewfinder, helps prevent unwanted light from the back and sides.
Magnifier:	Useful aid for critical focusing required in close-up photography. Mounts to rear viewfinder. Image size is doubled, and the Magnifier provides for diopter adjustment.
Angle Finder:	Useful for low angles, the Angle Finder has click stops every 90º and freely rotates 360º. Has built-in diopter adjustment.
Auto Extension Tubes:	A set of three tubes of different lengths, which mount singly or in combination between the camera body and lens, directly coupling with the MSX-DSX metering system and automatic diaphragm.
Auto Bellows:	A versatile bellows unit for photomacrography. Rack and pinion control allows precise adjustment. Additional features include a double cable release for diaphragm automation and provision for mounting the lens reversed, for large magnifications.
Slide Copier:	Used with the bellows unit, the slide copying attachment is mounted in front of the lens to allow copying of slides and filmstrips. It has a slide stage that makes it easy to crop mounted slides, and a removeable film tray to facilitate copying long rolls of 35mm film.
Bellows Stand:	Actually a small stage for photographing small objects. The platform rotates to allow for best positioning, and has clips to hold objects in place. The surface has a reflectance of approximately 18%, ideal for exposure measurements. A clear glass stage is provided for backlighting and incident light measurement.