| Filters: |
A series of five high-quality
filters, designed to maintain the high performance of the Mamiya-Sekor
CS lenses are available, except for series VI filters. They come in
the following types: SY48 (Y2), SO56 (O2), SL39 (UV), YG, SL-1B (skylight). |
| Lens Hoods: |
Lens hoods are either available
a screw-in accessories or built-in as retractable hoods, except for
the 28mm and 35mm lenses, which slip onto the lens barrel. Always
use the lens hood designed for the specific focal length of the lens
being used. |
Diopter Correction
Lenses: |
Many near- and far-sighted
persons have difficulty looking through a viewfinder wearing glasses,
but cannot focus accurately with them. Diopter Correction lenses,
available in six different strengths, adjust for this deficiency. |
Rubber
Eye Cup: |
The rubber eye cup helps
prevent unwanted light from entering the viewfinder from the back
and sides. |
| Magnifier: |
Useful aid for critical
focusing required in close-up photography. Mounts to rear viewfinder.
Image size is doubled, and the Magnifier provides for diopter adjustment. |
| Angle Finder: |
Useful for waist level
or right angle viewing, the Angle Finder has click stops every 90º
and freely rotates 360º. Has built-in diopter adjustment. |
Portable
Copy Stand: |
A light, portable four-legged
copy stand used to insure the film plane of the camera is held parallel
with the copy material. |
| Auto Bellows: |
A versatile bellows unit
for photomacrography. Rack and pinion control allows precise adjustment.
Additional features include a double cable release for diaphragm automation
and provision for mounting the lens reversed, for large magnifications. |
| Slide Copier: |
Used with the bellows unit,
the slide copying attachment is mounted in front of the lens to allow
copying of slides and filmstrips. It has a slide stage that makes
it easy to crop mounted slides, and a removeable film tray to facilitate
copying long rolls of 35mm film. |
| Bellows Stand: |
Actually a small stage
for photographing small objects. The platform rotates to allow for
best positioning, and has clips to hold objects in place. The surface
has a reflectance of approximately 18%, ideal for exposure measurements.
A clear glass stage is provided for backlighting and incident light
measurement. |
| Chest Pod: |
Convenient one-legged support
when hand-holding or a large tripod would be impractical. |
| T-mount: |
The T-mount adapter allows
you to use preset T-mount lenses on your Mamiya X-1000. |
| P-mount: |
The P-adapter permits the
use of either automatic or preset lenses that use the universal (42mm)
Pentax-type screw mount. Lenses with an automatic diaphragm pin will
be useable in a semi-automatic manner. |
